Kesmak KMY 2DG 450 - Addison Saws

Kesmak KMY 2DG 450

Semi Automatic Mitre Bandsaw 450 x 750mm
2 way swing head for easy mitre cuts
Large width cutting capacity
Remote control panel
Manual blade tensioning with hydraulic gauge
Blade breakage detection & auto-shutdown
Precision gauge for angle setting
Blade cleaning brush
Roller table
Electric flood coolant system

Kesmak KMY 2DG 450

Semi-automatic two way left/right swing head bandsaw ideal for structural steel, sectional material and solids. Manual blade tensioning with hydraulic gauge for precise setting and automatic band saw blade breakage shut down facility.

KMY 2DG 450
Capacity 90° Round Material Ø450mm
Capacity 90° Square Material 450 x 450mm
Capacity 90° Rectangular material 450 x 750mm
Capacity ±60° Round Material Ø450mm
Capacity ±60° Square Material 450 x 450mm
Capacity ±60° Rectangular material 450 x 750mm
Capacity ±45° Round Material Ø450mm
Capacity ±45° Square Material 450 x 450mm
Capacity ±45° Rectangular material  450 x 600mm
Capacity ±30° Round Material Ø400mm
Capacity ±30° Square Material  400 x 400mm
Capacity ±30° Rectangular material  300 x 500mm
 Blade  Dimensions  5780mm x 41mm
 Cutting Table Height from floor 840mm
 Dimensions H-W-L 1470 x 1100 x 3400mm
 Machine Weight 1800kg
 Blade  Speed range 15-90 m/min
 Cutting head Rotation Manual
 Vice Type Hydraulic full stroke
Addimist Lubricating System

Pure oil micro-mist blade lubrication system recommended for cutting tubes and sectional material where flood lubricant loss through the material is a problem. This precision delivery system allows adjustment for the number of pulses per min, and the quantity of each dose. (requires compressed air supply) The standard flood system is retained for cutting solid material and the operator can simply switch between systems.

Laser Line

Either a quality Addison fit German battery unit or factory fit powered item.

Swarf Brush

Fully adjustable swarf brush, essential for maximising blade life and improving cut finish.

Hydraulic Vice

Full stroke hydraulic vice

Hydra-Mechanic Band Tensioning

Manual blade tensioning with hydraulic gauge for precise setting of the blade strain.

Angle Cutting

Precision scale with sliding stop – 90° – 45° +30° for easy and accurate angle setting.

Cutting Control

Control panel with inverter setting

Roller Table

Roller table (600mm) with 2 rollers and 1200mm with 4 rollers

Cutting Stroke

Adjustable upper and lower limits for blade stroke to reduce cutting cycle times.

Blade Guides

Very important to get this right in any bandsaw, heavy steel guide arms support a precision set of pre-twist roller bearings and solid carbide blade guides to give maximum precision and performance. Also features a saw frame made of heavier steel then normal on a machine of this capacity and price point.

Additrack

Heavy duty roller table with adjustable height. 1800mm length and either 350mm or 500mm width.

Recently Viewed Products

You have not viewed any product yet!