Kesmak KLY 2 DT 650

Kesmak KLY 2 DT 650 Industrial Band Saw

Semi-automatic bi-directional industrial band saw designed for large sectional material with powered NC setting of the cutting angles, heavily inclined sawblade for low-stress cutting of square section and flat stock.

Technical Specifications	KLY 2DT 650
Capacity 90° – Round	Ø 670 mm
Capacity 90° – Square	650×650 mm
Capacity 90° – Rectangle	650×1080 mm
Capacity ±45° – Round	Ø 670 mm
Capacity ±45° – Square	650×650 mm
Capacity ±45° – Rectangle	650×670 mm
Capacity 30° – Round	Ø 410 mm
Capacity 30° – Square	410×410 mm
Capacity 30° – Rectangle	650×410 mm
Blade Drive Motor	5,5 kW
Hydraulic Pump Motor	1,1 kW
Coolant Pump Motor	0,12 kW
Rotation Motor	0,55 kW
Swarf Conveyor Motor	0,18 kW
Blade Size	9000 x 54 x 1,6 mm
Feeding Height	790 mm
Vice Maximum Opening	1080 mm
Vice Minimum Closing	95 mm
Vice Height	350 mm
H x W x L	2500 x 2200 x 4500 mm
Weight	6500 kg

Laser Line

Either a quality Addison fit German battery unit or factory fit powered item.

Addimist System

Pure oil micro-mist blade lubrication system recommended for cutting tubes and sectional material where flood lubricant loss through the material is a problem. This precision delivery system allows adjustment for the number of pulses per min, and the quantity of each dose. (requires compressed air supply) The standard flood system is retained for cutting solid material and the operator can simply switch between systems.

Vertical Clamp

Hydraulic vertical clamp for increased stability and to compensate bent material.

Curve Cutting Sensor

A device for measuring the vertical tolerance, if the user defined parameter is exceeded the machine with end the cutting cycle

Swarf Brush

Fully adjustable swarf brush, essential for maximising blade life and improving cut finish.

Roller Table

2 x 2000mm roller tables with 7 roller on each unit. (optional motorisation available)

Blade Guides

Hydraulic blade guides guarantee consistent and precise guide pressure and relax when the machine is not being used.

Hydraulic vice

Full stroke double cylinder hydraulic vice

Hydraulic Blade Tension

Cutting Control

7 ” PLC Touch Screen HMI for cutting data input… cutting angle required with powered head rotation using powerful servo drive. Piece qty selection

Arm Moving System with Vice

A very useful device that automatically synchronised the moving guide arm with the vice position. This guarantees optimum blade support at all times preserving blade life and optimising cutting performance.

Chip Conveyor

Helical type powered swarf removal system.

Hydraulic System

Individual control of the hydraulic pressure for every device within the machine.

Roller table Motorisation

Custom roller tables with added module for motorisation.

KLY 2DT 650 Data Sheet

Categories