Imet KS652 Band Saw

Battery Laser Line

Quality German laser line. Addison fit item.

Powered Laser Line

Imet factory fit powered laser line.

Performance upgrade

KS 652 offers the possibility to increase cutting performance through the 4KW gear motor, blade from 41mm high and hydraulic tension.

Addimist

The lubrication system cancels the dispersion of the coolant without damaging or affecting the life of the blade. The system is equipped with a 1.3l tank and nozzle.

Digital Angle Display

Vice

Quick set design with short acting cylinder and standard pressure reducer for thin wall material. The vice can be positioned either side of the saw blade depending on the mitre direction.

Quick set design with short acting cylinder and standard pressure reducer for thin wall material. The vice can be positioned either side of the saw blade depending on the mitre direction.

The cutting precision is ensured by the large precision graduated scale  There’re also positive stops at 45°left, 0 ° and 45 ° right.

Sawframe

With a heavy steel structure, the blade has an inclination of 6 ° to improve the penetration in the material and optimize cutting of square sections and flat plate reducing cycle times, extending blade life and reducing load on the machine components. The rotation of the bow is on precision bearing for ease of operation The blade of KS 502 has a tensioning of 2000kg / cm2 and is equipped with a control microswitch for immediate stop in case of blade breaking or power failure.

Blade guide system

Very important to get this right in any bandsaw, heavy steel guide arms support a precision set of pre-twist roller bearings and solid carbide blade guides to give maximum precision and performance.

Material detection device

Device to automatically detect the material height, this unit allows fast approach to the material before switching to the selected speed for the cutting cycle. The blade is only raised 1mm above the cut piece to reduce cycle times.

Cutting Control

KS 652 is equipped with a mobile control console with  LED confirmation for tensioning the blade, opening of the blade guard, motor thermal block and electrical tension. Through the control panel the operator can choose between 3 different ways of cutting end: return of the blade – not running – running or not returning after cut end.

Blade Cleaning Brush

Powered blade cleaning brush to enhance blade life and performance.

Loading/unloading roller table (Optional)

Roller conveyor suitable for the unloading and loading side. Length 1.5m, 1 pedestal, max loading 1500kg.

Unloading roller table (optional)

Unloading roller table with digital reading and manual movement. Available : -RTL3KS600 Measuring length of 3m, 3 pedestals, max loading 3000kg; -RTL6KS600 Measuring length of 6m, 5 pedestals, max loading 6000kg.

Unloading roller table (Optional)

Unloading roller table with length stop and selection of the lengths by means of a keyboard Available: -RTP3KS600 Measuring length of 3m, 3 pedestals, max loading 3000kg; -RTP6KS600 Measuring length of 6m, 5 pedestals, max loading 6000kg.

Motorized loading roller table (Optional)

Loading motorised roller tables, with chain transmission and motor reducer managed by inverter, with mobile keyboard. Available : -3m, loading 3000kg; -6m, loading 6000kg; -9m, loading 9000kg; -12m, loading 12000kg.

Motorized unloading roller table (Optional)

Unloading motorized roller table, with chain transmission and motor reducer managed by inverter, available only together with loading roller table. Available: -3m, loading 3000kg; -6m, loading 6000kg; -9m, loading 9000kg; -12m, loading 12000kg.

Digital reading length stop (Optional)

Digital reading length stop with manual positioning with automatic slowdown sensors, available only together with unloading motorized roller table
Measuring length 3m; Measuring length 6m; Measuring length 9m; Measuring length 12m

Motorized lenght stop (Optional)

Numerical control motorized measurement RR with fast approach for automatic slowdown of the piece (to be ordered coupled with automatic conveyors) -RR6S 6m measuring length -RR9S 9m measuring length -RR12S 12m measuring length

Single vertical roller (Optional)

Single vertical roller, height of 250 mm. to prevent falls, max 2 each 1,5 mt.

Pair of vertical rollers (Optional)

Pair of containment vertical rollers, made in steel, max 2 pairs for each element 1,5 mt long.