Imet KS 620 - Addison Saws

Categories

Imet KS 620

Two way mitre | 500mm round | 600mm x 400mm capacity | Rotating cutting table
Two way swing head easy mitre to 60° L&R
Free-rotating cutting table on bearings
Multi position hydraulic main vice
Inverter variable speed 18-110 m/min
Vice pressure reducer for thin wall tube
Material height sensor & rapid approach
Precise hydraulic downfeed control
Blade breakage detection and shut off
Blade cleaning brush
2 year parts warranty & 1 year labour
6° blade inclination at end of cut
Rapid low stress cutting of square section

Imet KS 620 Bandsaw

A market sector leading machine highly recommended for sawing large structural sections and solid materials in a demanding production environment. The bow pivot is situated below the center-line of the cutting table. This means that the saw blade is inclined 6deg at the end of the cut and is a unique feature not be underestimated. Why? It makes the cutting of square section and flat materials extremely efficient over standard design machines and greatly increases cutting performance. It also extends blade life and reduces load on machine components.

Cutting capacity at 0°Round: 500 mm
Square: 420 mm
Rectangular: 600 x 400 mm
Cutting capacity at 45° left/rightRound: 445 mm
Square: 410 mm
Rectangular: 450 x 250 mm
Cutting capacity at 60° leftRound: 320 mm
Square: 290 mm
Rectangular: 280 x 350 mm
Cutting capacity at 60° rightRound: 245 mm
Square: 240 mm
Rectangular: 240 x 310 mm
Cutting capacity (BUNDLE)Max: 500 x 300 mm
Min: 160 x 40 mm
Cutting capacity at 0° solids (C45)250 mm
Blade size5320 x 34 x 1.1 mm
Blade speed15 – 100 m/min
Blade3 KW
Working table height805 mm
Blade inclination
Weight1450 kg
Dimensions1705 x 2500 x 2500 mm

 

Powered Laser Line

Imet factory fit Powered laser line.

Battery Laser Line

Quality German battery laser line. Addison fit item.

Bundle Cutting Device-52

Hydraulic bundle clamping system for KS450-KS620-H601

Angle Digital Display-60

Digital display of the cutting angle

Addimist Bandsaw

Pure oil micro-mist blade lubrication system recommended for cutting tubes and sectional material where flood lubricant loss through the material is a problem. This precision delivery system allows adjustment for the number of pulses per min, and the quantity of each dose. (requires compressed air supply) The standard flood system is retained for cutting solid material and the operator can simply switch between systems.

Roller table Synchronisation Device

The synchronization system between the RTP line (unloading roller conveyors) and movement of the cutting angle.

Vice

Quick set design with short acting cylinder and standard pressure reducer for thin wall material. The vice can be positioned either side of the saw blade depending on the mitre direction.

Cutting precision

The cutting precision is ensured by the over sized graduated scale. (optional digital display) There are  automatic stops at 45°left, 0 ° and 45 ° right.

Saw Frame

Constructed from heavy gauge steel to allow very high speed cutting of variable resistance material with low vibration. The super high band tension (2000kg / cm2) ensures extremely precise tolerances on large material.

End of Cut Inclination

This is a massive benefit when cutting square section and flat plate and should not be under estimated. This design ensures the blade always has a line of least resistance through these materials, reducing cycle times – dramatically increasing blade life and reducing load on the machine components.

Material Detection Device

Device to automatically detect the material height, this unit allows fast approach to the material before switching to the selected speed for the cutting cycle. The blade is only raised 1mm above the cut piece to reduce cycle times.

Blade Cleaning Brush

Powered blade cleaning brush to enhance blade life and performance.

Cutting Control

KS 620 is equipped with a mobile control console with  LED confirmation for tensioning the blade, opening of the blade guard, motor thermal block and electrical tension. Through the control panel the operator can choose between 3 different ways of cutting end: return of the blade – not running – running or not returning after cut end.

Blade guide system

Very important to get this right in any bandsaw, heavy steel guide arms support a precision set of pre-twist roller bearings and solid carbide blade guides to give maximum precision and performance.

Loading/unloading roller table (Optional)

Roller conveyor suitable for the unloading and loading side. Length 1.5m, 1 pedestal, max loading 1500kg.

Unloading roller table (Optional)

Unloading roller table with digital display and manual movement : -RTL3KS600 Measuring length of 3m, 3 pedestals, max loading 3000kg; -RTL6KS600 Measuring length of 6m, 5 pedestals, max loading 6000kg.

Unloading roller table (Optional)

Unloading roller table with length stop and selection of the lengths by means of a keyboard Available: -RTP3KS600 Measuring length of 3m, 3 pedestals, max loading 3000kg; -RTP6KS600 Measuring length of 6m, 5 pedestals, max loading 6000kg.

Motorized loading roller table (Optional)

Loading motorised roller tables, with chain transmission and motor reducer managed by inverter, with mobile keyboard. Available : -3m, loading 3000kg; -6m, loading 6000kg; -9m, loading 9000kg; -12m, loading 12000kg.

Motorized unloading roller table (Optional)

Unloading motorized roller table (showing optional digital stop) with chain transmission and motor reducer managed by inverter, available only together with loading roller table. Available: -3m, loading 3000kg; -6m, loading 6000kg; -9m, loading 9000kg; -12m, loading 12000kg.

Digital reading length stop (Optional)

Digital reading length stop with manual positioning with automatic slowdown sensors, available only together with unloading motorized roller table
Measuring length 3m; Measuring length 6m; Measuring length 9m; Measuring length 12m

Motorized length stop (Optional)

Numerical control motorized measurement RR with fast approach and automatic slowdown of the piece (to be ordered coupled with automatic conveyors) -RR6S 6m measuring length -RR9S 9m measuring length -RR12S 12m measuring length

Vertical rollers (Optional)

Pair of containment vertical rollers, made in steel, max 2 pairs for each element 1,5 m long.

Single vertical roller (Optional)

Single vertical roller, height of 250 mm. to prevent falls, max 2 each 1,5 m.

Related Products

Recently Viewed Products

You have not viewed any product yet!