Skip to main content
Contact
My Quotes
My Quotes
TL 400 a aluminium saw image
TL 400 A table image
Tronzadoras MG TL 400 A Aluminium Saw - Image 3
Tronzadoras MG TL 400 A Aluminium Saw - Image 4

Tronzadoras MG TL 400 A Aluminium Saw

Left and right mitre through 180deg +/- 90°
Hydro pneumatic feeding of the sawblade
Precise control of the cutting feed rate
Moveable back fence for wider cut capacity
Enclosed cutting zone with interlocked hood
Blade stroke limiter for fast repetition cutting
Secure pneumatic clamping
Mist spray blade lubrication
Preparation for upper zone swarf extraction
Option for extraction kit
Removable chip collection drawer
Add to quote
Category:

Tronzadoras MG TLG 400 A

The TL400A mitre saw has been proven to be dependable and highly accurate offering the highest safety protection without reducing operating effectiveness. It  has an easy rotation cutting table for left/right mitre cuts through 180 degrees, and a moving back fence to increase the width cutting capacity. Standard with horizontal & vertical pneumatic clamps, mist spray blade lubrication system, (option for Addimist pure oil micro mist), removeable swarf drawer and air blow cleaning gun.

Spec Table:
Technical TL-400-A
Capacity 90° – Round135 mm
Capacity 90° – Square110 mm
Capacity 90° – Rectangle250 x 85 mm
Capacity 45° – Round115 mm
Capacity 45° – Square100 mm
Capacity 45° – Rectangle160 x 70 mm
Motor3,5 HP
Blade Diameter Ø 400 mm
Blade Speed3000 RPM
Blade Axis Diameter50 mm
Maximum Cutting Height130 mm
Cutting Degrees-22,5° / -45° / 90° / 45° / 0°
Weight380 kg
Dimensions900 x 1000 x 1480
Working Height970 mm
Cutting Chart

Addimist system image
Addimist

Pure oil micro-mist blade lubrication system recommended over the standard soluble system, as it delivers a high performance neat oil in minute highly controlled doses. Giving a cleaner working environment with no odours or risk of skin irritation sometimes connected with soluble fluids. Each dose can be scaled by adjusting the size of each pulse and the frequency of each pulse.

EW-3 Extractor

Complete swarf extraction system taking from both above and below the cutting table, highly efficient and fully compliant to handle aluminium, pvc, brass, wood, copper and composite materials. The steel container is removable for easy emptying, and the filter bags are maintained with either the standard manual shake lever or the optional pneumatic shake.

MG Digital Angle Display

Digital display of the cutting angle, accurate to 0.1deg, (factory fit option)

Automatic Hood (open-close)

Connection With Vacuum Cleaner (ON/OFF)

LED Illumination

Speed (RPM) Inverter

Standard feature icon
Ø400 mm TCT Saw Blade

Standard feature icon
Mitre Turning Table From -60º to +60º

Standard feature icon
2x Pneumatic Vertical Clamps

Standard feature icon
2x Pneumatic Horizontal Clamps

Standard feature icon
Bi-manual Control For Rising Blade Activation

Standard feature icon
Twin Pressure (low-HI) System For Clamping Cylinders

Standard feature icon
Adjustable Back Fence For Increasing Cutting Range

Standard feature icon
Adjustable Cutting Speed

Standard feature icon
Pneumatic Lubrification System

Venturi

Standard feature icon
Polycarbonate Shield

Additrack 3MS roller tracking table
Additrack 3MS

Roller support table with manual set material stop and graduated scale. 3000mm long with 280mm wide rollers (100kg point loading) available with steel rollers and neoprene coated rollers for aluminium and materials with a sensitive surface finish. Adjustable support legs are available together with connection brackets. The modules can be joined for longer lengths.

MG TM-Measuring System Image
MG TM-Measuring System

Tronzadoras MG TM 3 – 4 – 6 roller table with hand-wheel positioned material stop and battery LCD display of the selected cutting length. Fitted with soft coated rollers to protect the material surface finish.

Mg TMGD Measuring system
MG TMDG-Measuring System

Tronzadoras MG TMDG 3 – 4 – 6 roller table with hand-wheel positioned material stop, and powered digital display of the cutting length and higher accuracy than the TM version.

MG Autopos-Measuring System
MG Autopos-Measuring System

Tronzadoras MG Autopos 3 – 4 – 6 roller table with NC positioned material stop, touch screen HMI and memories for storing multiple jobs. There is also a version with USB for easy office programming.

TLG 400 & 500 Data Sheet

Reviews

There are no reviews yet.

Be the first to review “Tronzadoras MG TL 400 A Aluminium Saw”

Your email address will not be published. Required fields are marked *

Related Products

  • Tronzadoras MG TLG 352a aluminium saw

    Tronzadoras MG TLG 352 A
    Add to quote
  • Imet velox 350 SH E circular saw

    Velox 350 SHE Cold Saw
    Add to quote
  • Oz VEGA 2 semi automatic cutting machine

    OZ Machinery Vega – II
    Add to quote