Kesmak KMY 2DG 350 - Addison Saws


Kesmak KMY 2DG 350

Two Way Mitre | Semi-Automatic | Max Round Capacity 350mm
2 Way swing head for easy mitre cuts
Large width cutting capacity
Remote control panel
Manual blade tensioning with hydraulic gauge
Blade breakage detection with auto shutdown
Precision gauge for angle setting
Blade cleaning brush
Roller table
Electric flood coolant system

Kesmak KMY 2DG 350 Bandsaw

Semi automatic left/right swing head bandsaw ideal for structural steel, sectional material and solids.

KMY 2DG 350
Capacity 90°Round MaterialØ350mm
Capacity 90°Square Material350 x 350mm
Capacity 90°Rectangular material350 x 500mm
Capacity ±60°Round MaterialØ350mm
Capacity ±60°Square Material330 x 330mm
Capacity ±60°Rectangular material330 x 450mm
Capacity +45°Round MaterialØ340mm
Capacity +45°Square Material300 x 300mm
Capacity +45°Rectangular material250 x 320mm
Capacity -45°Round MaterialØ320mm
Capacity -45°Square Material200 x 200mm
Capacity -45°Rectangular material200 x 380mm
Capacity -30°Round MaterialØ210mm
Capacity -30°Square Material 180 x 180mm
Capacity -30°Rectangular material 160 x 200mm
ViceMaximum opening 500mm
ViceMinimum opening Zero
ViceJaw height 240mm
Blade DimensionsL-W4860 x 34mm
DimensionsH-W-L 1410 x 1670 x 2780mm
MotorMain drive2.2kw
Addimist Bandsaw

Pure oil micro-mist blade lubrication system recommended for cutting tubes and sectional material where flood lubricant loss through the material is a problem. This precision delivery system allows adjustment for the number of pulses per min, and the quantity of each dose. (requires compressed air supply) The standard flood system is retained for cutting solid material and the operator can simply switch between systems.


Either a quality Addison fit German battery unit or factory fit powered item.

Swarf Brush

Fully adjustable swarf brush, essential for maximising blade life and improving cut finish.

Hydraulic Vice

Full stroke hydraulic vice

Hydra-mechanic blade tension

Manual blade tensioning with hydraulic gauge for precise setting of the blade strain.

Angle Cutting

Precision scale with sliding stop – 90° – 45° +30° for easy and accurate angle setting.

Cutting Control

Control panel with inverter setting

Roller Table

Roller table (600mm) with 2 rollers

Cutting Stroke

Adjustable upper and lower limits for blade stroke to reduce cutting cycle times.

Blade Guides

Very important to get this right in any bandsaw, heavy steel guide arms support a precision set of pre-twist roller bearings and solid carbide blade guides to give maximum precision and performance. Also features a saw frame made of heavier steel then normal on a machine of this capacity and price point.


Heavy duty roller table with adjustable height. 1800mm length and either 350mm or 500mm width.

Related Products

Recently Viewed Products

You have not viewed any product yet!