Semi-Automatic Pivot Style Bandsaws - Kesmak KMY 2DG 280


Kesmak KMY 2DG 280 Bandsaw

Two Way Mitre | Semi-Automatic | Large Width Cutting | Max Round Capacity 280mm
2 way swing head for easy mitre cuts
Mitre Locations at +90°, +60°, +45° | -60°, -45°, -30°
Large width cutting capacity
Positionable control panel
Manual blade tensioning with hydraulic gauge
Blade breakage detection with auto-shutdown
Precision gauge for angle setting
Blade cleaning brush
Roller table
Electric flood coolant system

Kesmak KMY 2DG 280

Semi automatic left/right swing head bandsaw ideal for general workshop use, structural steel, sectional material and solids. Multiple mitre locations for easy mitre cutting set-up with incredible accuracy. Blade speed inverter as standard to ensure optimum cutting speed for a variety of materials.

Capacity 90°Round: 280mm
Square: 280mm
Rectangle: 280mm x 350mm
Capacity ±60°Round: 280mm
Square: 270mm
Rectangle: 180mm x 330mm
Capacity +45°Round: 240mm
Square: 210mm
Rectangle: 170mm x 240mm
Capacity -45°Round: 200mm
Square: 160mm
Rectangle: 160mm x 260mm
Capacity -30°Round: 140mm
Square: 120mm
Rectangle: 60mm x 160mm
Vice  Maximum Opening350mm
 Vice Minimum Closing0mm
Vice Jaw Height160mm
Dimensions H-W-L1255 x 1280 x 2155mm
Addimist Bandsaw

Pure oil micro-mist blade lubrication system recommended for cutting tubes and sectional material where flood lubricant loss through the material is a problem. This precision delivery system allows adjustment for the number of pulses per min, and the quantity of each dose. (requires compressed air supply) The standard flood system is retained for cutting solid material and the operator can simply switch between systems.


Either a quality Addison fit German battery unit or factory fit powered item.

Swarf Brush

Fully adjustable swarf brush, essential for maximising blade life and improving cut finish.

Hydraulic Vice

Full stroke hydraulic vice

Hydra-mechanic blade tension

Manual blade tensioning with hydraulic gauge for precise setting of the blade strain.

Cutting Control

Control panel with inverter setting

Cutting Stroke

Adjustable upper and lower limits for blade stroke to reduce cutting cycle times.

Blade Guides

Very important to get this right in any bandsaw, heavy steel guide arms support a precision set of pre-twist roller bearings and solid carbide blade guides to give maximum precision and performance. Also features a saw frame made of heavier steel then normal on a machine of this capacity and price point.

Angle Cutting

Precision scale with sliding stop – 90° – 45° +30° for easy and accurate angle setting.


Heavy duty roller table with adjustable height. 1800mm length and either 350mm or 500mm width.

Related Products

Recently Viewed Products

You have not viewed any product yet!