Kesmak KLY 2 DT 560

Kesmak KLY 2 DT 560 Bandsaw

Semi-automatic bi-directional industrial band saw designed for cutting large sectional material with the addition of powered NC setting of cutting angles, and heavily inclined sawblade for low-stress cutting of square section and flat stock.

Technical Specifications	KLY 2DT 560
Capacity 90° – Round	Ø 580 mm
Capacity 90° – Square	560 x 560 mm
Capacity 90° – Rectangle	560 x 950 mm
Capacity ±45° – Round	Ø 560 mm
Capacity ±45° – Square	550 x 550 mm
Capacity ±45° – Rectangle	550 x 640 mm
Capacity 30° – Round	Ø 360 mm
Capacity 30° – Square	360 x 360 mm
Capacity 30° – Rectangle	550 x 350 mm
Blade Drive Motor	4 kW
Hydraulic Pump Motor	1,1 kW
Coolant Pump Motor	0,12 kW
Rotation Motor	0,55 kW
Blade Size	7860 x 41 x 1,3 mm
Feeding Height	830 mm
Vice Maximum Opening	960 mm
Vice Minimum Closing	105 mm
Vice Height	350 mm
H x W x L	2400 x 2200 x 4500 mm
Weight	5800 kg

Laser Line

Either a quality Addison fit German battery unit or factory fit powered item.

Addimist Lubricating System

Pure oil micro-mist blade lubrication system recommended for cutting tubes and sectional material where flood lubricant loss through the material is a problem. This precision delivery system allows adjustment for the number of pulses per min, and the quantity of each dose. (requires compressed air supply) The standard flood system is retained for cutting solid material and the operator can simply switch between systems.

Vertical Clamp

Hydraulic vertical clamp for increased stability and to compensate bent material.

Curve Cutting Sensor

A device for measuring the vertical tolerance, if the user defined parameter is exceeded the machine with end the cutting cycle

Swarf Brush

Fully adjustable swarf brush, essential for maximising blade life and improving cut finish.

Roller Table

2 x 2000mm roller tables with 7 roller on each unit. (optional motorisation available)

Blade Guides

Hydraulic blade guides guarantee consistent and precise guide pressure and relax when the machine is not being used.

Hydraulic vice

Full stroke double cylinder hydraulic vice

Cutting Control

7 ” PLC Touch Screen HMI for cutting data input… cutting angle required with powered head rotation using powerful servo drive. Piece qty selection

Synchronised Guide Arm

A very useful device that automatically synchronised the moving guide arm with the vice position. This guarantees optimum blade support at all times preserving blade life and optimising cutting performance.

Chip Conveyor

Helical type powered swarf removal system.

Hydraulic Band Tensioning

Exact blade tension is applied using a hydraulic system

Hydraulic System

Individual control of the hydraulic pressure for every device within the machine.

Roller table Motorisation

Custom roller tables with added module for motorisation.

Categories