Imet KS1202 NC Band saw - Addison Saws


Imet KS1202 NC Band saw

Semi automatic NC mitre saw
NC powered head rotation
Mitre cuts up to 60° left and right
54mm saw blade
Variable cutting rate and pressure
6° inclined blade for optimum cutting
Variable blade speed (inverter)
Precision variable down feed control
Horizontal & vertical hydraulic clamping
Material height senor & rapid approach
Hydraulic blade tensioning
Blade breakage detection & auto shutdown
2 year parts warranty (1 year on-site labour)
Powered blade cleaning brush
Pure oil mist spray lubrication system

KS1202 NC Band saw

Ideal for cutting large sectional steel profiles in high demand environments, especially square section steels where the 6° canted saw bow offers the line of least resistance through the entire cut, giving extending blade life, faster cutting times and less stress on the machine components. This machine is equipped with NC powered head rotation for precise angle setting via the 10″ touch screen HMI.  The KS1202 is constructed to work in a demanding environment where ease of use, performance and reliability are demanded. This is underlined by the industry leading 2 year manufacturers parts warranty.

Cutting capacity at 0°Round: 680mm
Square: 640mm
Rectangular: 1250x600mm
Cutting capacity at 45° leftRound: 680mm
Square: 600mm
Rectangular: 870x600mm
Cutting capacity at 45° rightRound: 680mm
Square: 600mm
Rectangular: 840x600mm
Cutting capacity at 60° leftRound: 580mm
Square: 530mm
Rectangular: 550x450mm
Cutting capacity at 60° rightRound: 550mm
Square: 450mm
Rectangular: 550x450mm
Cutting capacity with bundle deviceMax: 1000×320 mm
min: 50x50mm
Cutting capacity at 0° solids (C45)C45)400mm
Blade size8140x54x1.6mm
Canted blade
Blade motor7.5KW
Blade speed15/90 m/min
Working table height855mm
Battery Laser Line

Premium quality battery powered laser line. Can be fitted to most bandsaws and some circular saws. Excellent battery life and adjustable projection line.

Laser Line-61

Imet factory fit powered laser line.

Blade Deviation Control

Blade deviation control with automatic stop of the working process in case of damages.

Bundle Vice

Hydraulic bundle cutting device. Maximum cutting capacity: 1000x320mm, minimum cutting capacity: 50x50mm.

Cutting Control

7-inch touch screen display (with simple and intuitive graphics for different quantities and lengths on the same bar. the operator can to store up to 99 cutting programs by automatically calculating the thickness of the blade, the total number of pieces to be cut, setting the cutting lengths and managing the automatic cutting cycle..

Saw Frame

With a heavy steel structure, the blade has an inclination of 5° to improve the penetration in the material and optimize cutting of square sections and flat plate reducing cycle times, extending blade life and reducing load on the machine components. The rotation of the bow is on precision bearing for ease of operation The blade of KS 502 has a tensioning of 2000kg / cm2 and is equipped with a control microswitch for immediate stop in case of blade breaking or power failure.

Sawframe rotation

The machine has an automatic saw frame rotation system managed by toothed belt and motor reducer. Positioning precision is provided by an hydraulic cylinder to stop the rotation.

Inclined Sawblade

The 5° blade inclination has considerable benefits when cutting square and flat material. With sectional material the line of least resistance is followed through the entire cut. With solid the initial contact is not across the entire width. All of these benefits add up to extended blade life faster cutting times and less stress on the machine components.

Blade guides

Very important to get this right in any bandsaw, heavy steel guide arms support a precision set of pre-twist roller bearings and solid carbide blade guides to give maximum precision and performance. The moving blade guide is automatically synchronised with the vice position ensuring the guide is always as close to the material as possible.

Blade Cleaning Brush

Powered blade cleaning brush to enhance blade life and performance.

Minimal lubrification system

The machine has a standard minimal lubrification system in kit with 2 nozzle and 3 l tank capacity. The minimal lubrication standard avoids the mess and leakage with flood coolant escaping through hollow section.

Loading/unloading roller table (Optional)

Loading and unloading roller table with free rolls and 2 vertical containment rolls on one side. 2m length. This unit can be ordered with transmission components for motorised rollers. (Optional motorisation system control is required).

Motorization system (Optional)

Motorization system for motorized roller table. Recommended every 6m roller table. Max speed 10m/min

CNC motorized measurement length stop (Optional)

CNC motorized measurement length stop with fast approaching and automatic slowdown of the piece. To be ordered together with RTR motorized roller table. -RR6S measurement length 6m -RR9S measurement length 9m -RR12S measurement length 12m

Pair of vertical containment rolls (Optional)

Pair of vertical containment rolls in steel max 2 pair every 1.5m element.

Related Products

Recently Viewed Products

You have not viewed any product yet!